- Mac mini Model A1176 Optical Drive Replacement!
- sound keys dont work on mac.
- Is Apple about to kill the SuperDrive on Macs?.
In the next few steps, you will remove the four Phillips screws securing the internal frame to the bottom case. Included in each step is an overview picture showing the general location and a closeup showing the actual screw. Remove the recessed Phillips screw near the power button securing the internal frame to the bottom housing. Remove the recessed Phillips screw near the sleep light securing the internal frame to the bottom housing. This screw is the longest of the four screws securing the internal frame to the bottom case. Remove the Phillips screw near the audio ports securing the internal frame to the bottom case.
Gently lift the internal frame up from the bottom housing, minding the AirPort antenna and any other cables that may get caught. It may be necessary to pull up near the interconnect board to separate it from the logic board. Remove the Bluetooth antenna from the internal frame by pushing up on both sides of the board as close to the center post as possible.
Turn the mini degrees and remove the two Phillips screws securing the optical drive to the internal frame on the other side. Remove the two Phillips screws securing the interconnect board to the optical drive. Use the flat end of a spudger to separate the interconnect board from the optical drive. I did not complete this guide. Select a Language: Help Translate iFixit. Walter Galan and 4 other contributors. Difficulty Moderate. Steps Time Required Suggest a time?? Sections 3. Flags 0.
Introduction Upgrade or replace the combo or SuperDrive. Tools Buy these tools. Parts Buy these parts. Step 1 Top Housing. One comment. Add Comment. Step 2. Add a comment.
Step 3. Step 4. Step 5. Step 6.
Mac Mini won't read cd's or DVD's
Step 7 Internal Frame. Step 8. Step 9. A disc with physical defects may become stuck in or cause damage to the drive.
If the Superdrive is oriented upside down it will not read discs. Aluminum enclosure is facing up Incorrect: Apple logo should be facing down Because the USB port on external displays may not be powered at startup, connect the drive directly to the USB ports on your Apple computer when you need to use the Superdrive as a startup device. Don't use a USB hub. Be sure not to put the drive underneath anything heavy, underneath your computer, or on top of your computer. If you have trouble using a SuperDrive with Microsoft Windows, try starting the computer with the SuperDrive already plugged in.
Check your disc Before troubleshooting, first confirm the discs you are using will work with your computer. Standard mm round disc: Example nonstandard sized or shaped discs that are not supported: Specific troubleshooting Below are several possible symptoms you may see. Doesn't accept discs Be sure to check your disc to make sure it is flat. You can check this by putting the disc upside-down on a flat surface. If the disc is bowed up on any side or in the center, do not use the disc because it might get stuck in the drive.
Do not use discs that have anything attached to them or dangling from them such as "sweeper" or cleaning discs. If the drive struggles when you put in a disc or stops part-way, carefully look at the disc for labels that may be interfering.
Get help with the slot-loading SuperDrive on your Mac computer
If there aren't any raised labels then try putting the disc in a few more times. Try another disc to see if the issue is being caused by a specific disc. Make sure you insert the disc far enough for the drive mechanism to activate. You need to insert discs nearly all the way before the drive will activate and pull them in.
If you don't completely insert a disc, the drive will reverse and push the disc back out.
- First steps.
- External DVD drive not working post-Mojav… - Apple Community.
- share optical drive mac os?
Allow the drive one or two seconds to accept the disc while it is fully inserted. Accepts discs but they don't mount or are automatically ejected Make sure the drive is not placed upside down. The aluminum enclosure should be facing up as shown in section 1. Check the disc's surface for scratches and dirt, since these things can prevent the disc from appearing on the desktop.
Mac Mini won't read cd's or DVD's | MacRumors Forums
Ensure your drive can read the specific type of disc being used. The System Profiler or System Information may provide additional information regarding what media your computer supports. OS X Snow Leopard v Then, click More Info. OS X Lion v Choose System Information from the menu. Doesn't eject discs or discs eject slowly If the drive ejects discs slowly or appears to be struggling, insert and eject a single disc several times. Check the disc to see if it has a label or other material stuck to the disc that increases the thickness. Remove the label if possible.
If the disc will not eject, try pressing the eject key on the keyboard. Some older keyboards may use the F12 key to eject discs.
Related dvd drive mac mini not working
Copyright 2019 - All Right Reserved